Learn more about waterproofing and waterproofing materials

The use of membrane materials and coatings or roofing sheets to cover the top, paint, cover the outside, and line the bottom to prevent liquid water from penetrating or overflowing is called waterproofing.

Waterproof paint and waterproofing agent are two materials that serve the purpose of waterproofing.

👉 Waterproofing: Infiltration problems due to structural damage such as cracks in pipes, bare necks, base of walls, cracks in walls, cracks in foundations, etc., usually use waterproofing agents to handle.

👉 Waterproof paint: for horizontal surfaces, waterproof paint has the effect of blocking water from the top and waterproofing from the side to be applied with vertical surfaces. Special waterproof paint for concrete or cement plastered surfaces such as roof floors, floors, vertical walls, siding, eaves, etc.

With more than 10 years of experience in the field of design, construction and construction, ETTE INTERIOR would like to introduce to customers K-1 waterproofing material with outstanding advantages.

K-1 waterproofing material for concrete and mortar surfaces

✔️ Economic efficiency
✔️ Easy to apply on any surface
✔️ Just mix with cement
✔️ Direct construction at the position of the pipe neck
✔️ Good adhesion on all surfaces
✔️ Create a level of comfort for the construction surface
✔️ Can withstand high impact impact.

📌 K-1 is the best waterproof material using elastic waterproof compound.

📌 Reflective heat energy and superior waterproofing, helping to protect the house sustainably over time.

📌 Excellent waterproofing, impact resistance, durability and high adhesion make the most durable architectural works.

Mixing ratio

•  Surface waterproofing ceiling, toilet, water tank, ratio K-1 (1 liter) + cement (1kg).
•  The waterproof surface needs to bear the force of the garage, workshop, and warehouse. Ratio K-1 (1 liter) + cement (0.5kg) + sand (1.5kg).

▶️ Pay attention to mix cement and sand well before mixing in K-1

 See more: Hans Protective Shoe Collection

Steps to apply K-1 waterproofing on specific surfaces

Waterproofing walls indoors, outdoors, terraces, toilets, swimming pools

1. Clean impurities and dust on the construction surface
2.Repair the part that needs waterproofing
3. Waterproofing layer 1 - mix well material k-1 and apply directly to the surface to be waterproofed with a paint brush or sprayer (dry after 4o minutes - 2 hours)
4. Waterproofing layer 2 - when layer 1 is dry, mix K-1 with the ratio K-1 (1 liter) + cement (1.5 kg) and apply directly to the surface to be waterproofed.

 

Waterproofing basements for parking, warehouses, factories and other places where strong concrete strength is required

1. Clean impurities and dust on the construction surface
2.Repair the part that needs waterproofing
3. Waterproofing layer 1 - mix well material k-1 and apply directly to the surface to be waterproofed with a paint brush or sprayer (dry after 4o minutes - 2 hours)
4. Waterproofing layer 2 - when layer 1 is dry, mix K-1 with the ratio K-1 (1 liter) + cement (0.5) + sand (1.5 kg) and apply to the surface directly. next.

▶️ Pay attention to mix cement and sand well before mixing in K-1

Through the introduction of the company ETTE INTERIOR about K-1 waterproofing material and the variety of materials. We hope that you have considered and selected the most suitable materials to bring the highest efficiency for the project.

With advanced machinery system, well-trained and dedicated technical team, and accumulated experience through many accumulated works, we always ensure efficiency, quality, and progress for the project. of your customers.

Immediately contact our company ETTE INTERIOR via CLICK for detailed and specific advice and instructions.

📞 Hotline : + 84 28 3620 5500

💻 Facebook : ETTE Interior

🌎 Website : http://ette-mall.com

📩 Email : 4989@ette-mall.com